News

MINERS
⛏ T-Rex v0.25.15
* extend the new LHR unlock functionality to ETH+ALPH dual mining, and ERGO single mode.
* allow LHR setting "up" and "down" auto-tune intervals separately: e.g. "lhr-autotune-interval": "5:120"
Meaning that in lhr-autotune-mode full mode the miner will be increasing LHR tune value every 5 minutes, and decreasing it as soon as it starts tripping LHR more frequently than once every 2 hours.
* changed lhr-autotune-step-size default value to 0.1 from previously 0.5.
* LHR low power mode can now be set for GPUs individually, e.g. "lhr-low-power": "0,1,1,0"
The second and third GPUs will be working in low power mode.
* LHR unlocker is more stable compared to 0.25.12, infinite LHR lock loops should be solved now.
* fixed  "Duplicate share" issue on ethash and blake3 algos.
IMPORTANT: LHR unlocker requires 510 series drivers and it will not work properly with older drivers
⛏ PhoenixMiner v6.2c BETA
* using newer AMD RX4xx/5xx kernels even on older drivers e.g. 19.10, older kernels on these drivers, use the new command line parameter -clabi 1.
* added a workaround for the SSL pools with self-signed or expired SSL certificate: you can use the new command-line parameter -weakssl (for the pool specified by -pool), or the new WEAKSSL: 1 option for the pools in epools.txt.
* fixed a crash with Nvidia cards on some older drivers, if PhoenixMiner crashes or exits while showing "Initializing NVML..." try the new command line parameter -nvmalt.
* other small fixes.
⛏ miniZ v1.8z
* improved performance and stability for ETH for LHR GPUs; 
* improved performance on 125,4 for RTX 30xx; 
* added AMD Polaris support for 125,4; 
* added FIRO support; 
* fixed issues with SERO and 192,7; 
* minor bug fixes
⛏ NanoMiner v3.6.2
* significantly reduced stale Ethash shares on Nvidia GPUs
⛏ SRBMiner-Multi v0.9.4
* added sha3d, 0x10 algorithms
* performance increase on curvehash algorithm
* removed astrobwt algorithm
* removed --gpu-cn-mode parameter
⛏ XMRig v6.17.0
* added support astrobwt/v2 for mining DERO-HE coin algo.

MINERS
⛏ lolMiner v1.47
* improved ETH solver with up to 78% unlock for LHR v2
* added support for LHR unlock in 470.103.01 and all 510.x drivers.
* --lhrtune parameter now takes absolute % values to fix a certain percentage of unlocking.
* cheaper locks: when unlocking the miner will continue mining at low speed to make the unlock procedure more cheap.
* reduced Ton & Alephium fee in Eth+Ton / Ethash+Alephium dual mining to 0%.
* new --silence parameter controls the amount of information the miner will print during its work.
* added Nvidia memory junction temperature readings on cards that support this.
* fixed a bug with dual mining on LHR cards where the dual algorithm was mined with reduced rate after Ethash epoch change.
* fixed a bug with --compactaccept not showing the * sign on short statistics.
⛏ GMiner v2.90
* improved performance for Ethash+TON dual mining.
* improved TON performance.
* added ETC+TON dual mining support.
* added RTX 3060 Ti [2414] support.
* improved pool balance reporting, supported pools and coins.
⛏ nanominer v3.6.0
* Significantly improved Ergo (Autolykos2) performace on AMD Vega GPUs (up to 15%);
* Improved performance for ethash algorithms family (ETH, ETC, UBQ, etc) on Nvidia Turing family (up to 0.4%);
* Added functionality: showing share difficulty for ethash algorithms family

MINERS
⛏ WildRig Multi v0.31.3 beta
* support 0x10 algorithm(coin ChainOX)
⛏ SRBMiner-MULTI 0.9.3
* Removed algorithm 'argon2id_ninja'
* Minor bug fixes
⛏ GMiner v2.89
* display unpaid balance on ethash pool (supported pools: ethermine, hiveon, 2miners, f2pool, nanopool)
* auto fan supports memory temperature (--tmfan)
⛏ T-Rex 0.25.9
* Allow setting "LHR dual ratio" parameter for ETH+ALPH dual mining, e.g. --dual-algo-mode a12:r10:lr12 (dual ratio 10, LHR dual ratio 12)
* Display memory temperature for GPUs with GDDR6X memory type
* Fixed: Miner frequently disconnects from the pool when mining SERO

MINERS
⛏ GMiner v2.85
* added toncoinpool.io support
⛏ Teamredminer v0.9.4.2
* Fixed eth+ton issue that could lead to a higher eth shares stale rate. Primarily for large gpus (6800/6900XT) with aggressive tuning
* Internal split of binaries helping some Vegas and Navis with crash issues on ethash from 0.9.2 and forward
⛏ PhoenixMiner v6.0c
* Added support for new AMD Linux drivers up to version 21.50
* Other small fixes

MINERS
⛏ GMiner v2.83
* Added wss protocol support for TON mining, now miner support all major mining pools: ton-pool.com, tonwhales.com and icemining.ca; 
* Fixed miner crash on TON connection loss in dual mining
⛏ SRBMiner-Multi v0.9.2
* Added algorithm dynamo for GPU mining and lowered devfee to 1%
* some other improvements and fixes
⛏ PhoenixMiner v6.0b
* Implemented partial unlocking of Nvidia LHR cards. By default they are detected automatically, and unlocked with the default unlock intensity. If you want to try higher (or lower) LHR unlock intensity, use the new -lhr command line parameter
* If an Nvidia LHR card locks up because of high -lhr (the default is -lhr 520, which will work with most cards), the card will be unlocked again, and the -lhr value will be lowered if necessary to avoid further lock ups
* Show the DAG epoch and DAG size in the log
* Multiple other small fixes and improvements